[. . . ] Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. the appliance is designed exclusively for private use and for the envisaged purpose. Do not use it outdoors (except if it is designed to be used outdoors). [. . . ] The blade block, the cover disc and the gasket must be mounted in the right order. The carafe must be positioned in such a way that the safety pin fits exactly on to the safety switch in the housing. Connect the mains lead to a properly installed 230 V, 50 Hz safety power socket. For constant mixing (continuous mode): When operating in levels 1 or 2 snap the selector into the desired position: Level 1 = low rpm Level 2 = high rpm Shift the selector to , , 0" to switch off the appliance. Note: Please note that you can only use the maximum filling amount of 1. Warning: The electric plug must be removed before the mixer is taken apart!All the parts of the decanter can be washed in the uppermost rack of the dishwasher. After cleaning and drying the decanter must be reassembled so that the gasket is located between the blade block and the decanter. See , , Overview of Components" Before using each time the blade block must be screwed securely onto the decanter. Important notice on the safety switch The all-purpose mixer is equipped with a safety switch that avoids that the motor run without the decanter mounted on it (danger of injury!When the vessel is put in place the safety pin presses on to the safety switch of the motor housing. If the safety pin is not correctly positioned on the safety switch, the motor will not start. This may be the case, for example, if the position of the covering ring has been changed, for example during cleaning. For right-handed users the safety pin must be located below the handle. For left-handed users the safety pin must be located below the pour spout. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. [. . . ] Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. ) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid!After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs. [. . . ]